Variants
color
article no
capacity
quantity in box
white
1050
400 g
18
white
1156
1 kg
10
white
1154
1,8 kg
10
Gloss grade
matt
Description
Bicomponent finishing poliester putty with high adhesion to different substrates. Allows for application of thin layers, removes wholes, scratches and smaller imperfections. Leaves the surface perfectly smooth after sanding.
Advantages
- Very good adhesion to metals.
- Easy to mix and apply.
- Smooth surface after sanding.
Substrates
The product has very good adhesion to various substrates. It can be applied over:
- Steel and aluminum after flatting and degreasing.
- Zinc coated steel after flatting and degreasing.
- Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition
We recommend sandpaper with gradations: P80÷P120.
Caution: Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.
Important informations
degrease
mixing ratio by weight
100 : 2
pot life
4 ÷ 7 min. 20°C
hardening time
20 ÷ 30 min. 20°C
P80 ÷ P120
P120 ÷ P320
Use
Finishing polyester putty for car repairs.
Mixing ratio by weight
Putty: 100
Hardener: 2
Stir thoroughly until achieving homogenous paste to not create air inclusions.
Layer thickness
Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 5mm.
Pot life is 4÷7 minutes at 20°C
Hardening time
20÷30 minutes at 20°C.
Temperature below 20°C significantly increases the hardening time.
Sanding
Coarse sanding (dry): P80÷P120,
Finishing sanding (dry): P120÷P320.
IR Drying
5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
Do not exceed the temperature of 60°C.
Use as recommended by the equipment manufacturer.
Caution: Wait about 5 minutes before the IR drying process
Further work
Polyester putties can be over coated with:
- 2K polyester spray fillers.
- 2K wash primers.
- 2K acrylic fillers.
- 2K epoxy fillers.
General notes
- Excessive amount of hardener will cause problems with bleaching of the top coat!
- The rooms should be well ventilated.
- Tools should be washed directly after application.
- Use personal protection equipment during the 2K products application. Protect
the eyes and respiratory system.
Caution: To maintain safety, always follow the instructions given in the MSDS for
the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.