Variants
color
art. nr.
capacity
quantity per carton
dark grey
7939
1000 ml
10
Gloss grade
matt
Description
2-component flexible polyester putty designed for car repairs. Especially recommended for repairing plastic body parts exposed to vibrations. It shows very good adhesion to most types of plastics. Thanks to its exceptional flexibility, protects the repaired surface against cracking.
Advantages
- Very good adhesion to plastic.
- Exceptionally high flexibility.
- Good sanding properties.
- Very smooth surface after sanding.
Substrates
The product has very good adhesion to all outer plastic panels (PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, PUR soft foam, UP-GF).
Before applying, the surface should be well cleaned with an abrasive needled cloth and degreased with detergent and water (do not use benzene based removers as they can dissolve the surface). Wash again using water and detergent, rinse with pure water and dry with air.
It is recommended to heat the element to 50°C before starting application. This will help remove any silicone from the plastic surface.
Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.
Important informations
degrease
mixing ratio by weight
100 : 2
pot life
3 ÷ 4 minutes
20°C
drying time
25 ÷ 35 min
20°C
P80 ÷ P120
P120 ÷ P320
Use
Flexible polyester putty especially recommended for car body repairs.
Mixing propotion by weight
Putty: 100 parts
Hardener: 2 parts
Stir thoroughly until a homogenous paste is obtained. Be careful not to create air inclusions.
Layer thickness
Putty can be applied in several thin coats. After each of them the product should dry through. Sand the coating before application of next coat.
Pot life is 3÷4 minutes at 20°C
Drying time
25÷35 minutes at 20°C.
Temperatures below 20°C significantly increase the drying time.
Sanding
Coarse sanding (dry): P80÷P120.
Finish sanding (dry): P120÷P320.
Further work
PLASTIC Polyester putties can be over coated with:
- 2K acrylic primers.
- 2K epoxy primers.
General notes
- Excessive amount of hardener will cause problems with bleaching of the topcoat!
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
- Clean the guns and equipment immediately after use.
- The rooms should be well ventilated.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.
