Flexible poliester putty for plastic.
quantity in box
Polyester putty with high flexibility dedicated to car body plastic panels repairs, in particular exposed for vibrations. Shows very adhesion to most types of plastic. Putty has properties of filling and finishing product.
- Very good adhesion to plastics.
- Great flexibility.
- Good sanding properties.
- Very smooth surface after sanding.
The product has very good adhesion all outer car body parts made of plastic (PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, PUR soft foam, UP-GF).
The Surface should be wiped with non woven fabric, degreased with water and detergent ( do not use benzine based removers as they can melt plastic surfaces) then it should be washed again with water and detergent, rinsed and dried with air.
Caution: Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.
mixing ratio by weight
100 : 2
3 ÷ 4 min. 20°C
25 ÷ 35 min. 20°C
P80 ÷ P120
P120 ÷ P320
Flexible polyester putty for plastic car body repairs.
Mixing ratio by weight
Stir thoroughly until achieving homogenous paste to not create air inclusions.
Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 5mm.
Pot life is 3÷4 minutes at 20°C
25÷35 minutes at 20°C.
Temperature below 20°C significantly increases the hardening time.
Coarse sanding (dry): P80÷P120,
Finishing sanding (dry): P120÷P320.
Polyester putties can be over coated with:
- 2K polyester spray fillers.
- 2K acryl fillers.
- 2K epoxy fillers.
- Excessive amounts of hardener will cause problems with bleaching of the top coat!
- The rooms should be well ventilated.
- Tools should be washed directly after application.
- Use personal protection equipment during the 2K products application. Protect
eyes and respiratory system.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.