Variants
color
art. no.
capacity
quantity per carton
gray
300002320
400 ml
12
Gloss grade
matt
Technical documentation
Description
High-quality primer paint with very short drying time. It is designed to prepare the substrate for paint work on auto body parts. Suitable as a primer for reapplication under all paint systems, easy to sand wet and dry, very efficient.
Substrates
The product is designed for application to treated and untreated wood, metal, stone surfaces. Not recommended for difficult substrates such as galvanized steel and aluminum.
The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed in advance and the surface sanded.
In the case of plastic, it is advisable, before starting varnishing work, to heat the element at 50°C, which will facilitate the removal of silicone compounds from its surface.
Good surface preparation is essential to achieve the best repair results.
Substrate and surface preparation
The product is designed for application to treated and untreated wood, metal, stone surfaces. Not recommended for difficult substrates such as galvanized steel and aluminum.
The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded.
In the case of plastic, it is advisable, before starting varnishing work, to heat the component at 50°C, which will facilitate the removal of silicone compounds from its surface.
Application
The best temperature for the application of the spray is 15 ÷ 25°C.
- Before use, shake the container about 2 - 3 minutes and try the spray on the cardboard.
- Keep the aerosol at a distance of 25 ÷ 30 cm from the painted surface when painting.
- Apply the primer in several thin layers at intervals of no more than 5 ÷ 10 minutes. Shake the aerosol again before applying each subsequent layer.
- It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application - this will improve the re-use of the product and preserve its existing properties, as well as protect the nozzle from possible clogging.
Note: for safety purposes, always follow the data on the Material Safety Data Sheet for the product.
Drying times at 20°C*:
- dust dry: after about 5 - 10 minutes
- touch dry: after about 20 - 30 minutes
- full dryness: after about 24 hours
*Drying time depends on temperature, humidity and coating thickness.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.
