Universal

Filling poliester putty

1 8

Share product information

Variants

color

article no

capacity

quantity in box

yellow

1179

400 g

18

yellow

1184

1 kg

10

yellow

1105

1,8 kg

10

yellow

1233

4,5 kg

4

Gloss grade

matt

1 8

Share product information

Description

Filling poliester putty dedicated to car body repairs. Universal use product allows to get very good quality of filling providing high level of hardness and flexibility. Easy to work and sand.

Advantages

  • Very good adhesion to metals.
  • Easy to mix and apply.
  • Good sanding quality.

Substrates

The product has very good adhesion to various substrates. It can be applied over.

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

We recommend sandpaper with gradations: P80÷P120.

Caution:  Do not apply the putty directly on wash primers, 1K acrylic and nitrocellulose products.

Important informations

degrease

mixing ratio by weight
100 : 2

pot life
5 ÷ 6 min. 20°C

hardening time
17 ÷ 27 min. 20°C

P80 ÷ P120
P120 ÷ P320

Application process

Use

Filling polyester putty for car body repairs.

Mixing ratio by weight

Putty: 100
Hardener: 2
Stir thoroughly until achieving homogenous paste to not create air inclusions.

Layer thickness

Putty can be applied in several thin coats. After each of them the product should dry through. Sand the coating before application of next coat.

Pot life is 5÷6 minutes at 20°C

Hardening time

17÷27 minutes at 20°C.

Temperature below 20°C significantly increases the hardening time.

Sanding

Coarse sanding (dry): P80÷P120,
Finishing sanding (dry): P120÷P320.

IR Drying

5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
Do not exceed the temperature of 60°C.
Use as recommended by the equipment manufacturer.
Wait about 5 min before the IR drying process.

Further work

Polyester putties can be over coated with:
- 2K polyester putties.
- 2K polyester spray fillers.
- 2K acrylic fillers.
- 2K epoxy fillers.

General notes

- Excessive amount of hardener will cause problems with bleaching of the top coat!
- Use personal protection equipment during the 2K products application. Protect
eyes and respiratory system.
- Use personal protection equipment during the 2K products application.
- Protect eyes and respiratory system.

Caution: To maintain safety, always follow the instructions given in the MSDS for
the products.

Questions and answers

Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.

Ask about this product