art. no. | capacity | quantity in box |
13549 | 1 l | 6 |
13551 | 5 l | 4 |
hardener for clear coat | ||
standard 13553 | 0,5 l | 6 |
standard 13555 | 2,5 l | 4 |
fast 14035 | 0,5 l | 6 |
fast 14037 | 2,5 l | 4 |
High quality bicomponent acrylic transparent clear coat for fast repairs with high content of solid compounds (>55%).
Characterised by short drying time, excellent flow and easy application. Might be used for spot and full body car repairs. Creates great looking surface, giving it very high gloss.
Acrylic clear coats can be applied over:
For dulling the color we recommend the following :
degrease
mixing ratio
2 : 1 + 0÷5%
spray viscosity
17 ÷ 19s / 20°C
pot life
3,5 h / 20°C (hard. standard)
2 h / 20°C (hard. fast)
1,5÷2×1 layer
HVLP / RP
ø1,3 ÷ 1,4 mm
1,2÷1,4mm
between layers
approx. 5-10 min.
before baking
approx. 10 min.
hardening time
40 min. / 20°C
10 min. / 60°C
(for standard hardener)
Fast body car repairs which require permanent finish.
Clear Coat: 2
Hardener: 1
Thinner for acrylic system: 0÷5%
17÷19 seconds in 20°C DIN4
3,5 hour in 20°C (hardener standard)
2 hours in 20°C (hardener fast)
Number of layers: 1,5÷2×1
Gun parameters
RP Nozzle: 1,2÷1,4mm; Pressure: 2,0÷2,2 bar.
HVLP Nozzle: 1.3÷1,4mm; Pressure inside the nozzle: 2,0 bar.
Caution: follow the gun producer instructions.
Application process:
– 1,5 layer – 1 middle, thin, then full layer with keeping the distance of 2 min. for evaporation between the layers, to obtain the thickness of a dry film 50-60 µm,
– 2 layers – 2 full layers with evaporation time 5-10 min., to obtain the thickness of a dry film 60-75 μm,
Standard
Between layers: 5-10 min
Before baking: 10 min
Fast:
Between layers: 5-10 min
Before baking: 10 min
At 20°C
Dust free: 40 minutes.
Touch free: 3 hours
Useful hardness: 13 hours
Complete hardness: 7 days
At 60°C
Dust free: 10 minutes.
Touch free: 15 minutes
Useful hardness: 15 min + 4 hrs /20°C
Complete hardness: 15 min + 4 days /20°C
Temperatures below 20°C significantly decrease the drying time.
10 ÷ 15 minutes of short waves, depending on the layer thickness and the type of radiator.
Do not exceed 60°C.
Use as recommended by the equipment manufacturer.
Wait about 10 minutes before starting the heater drying.
1 liter of mixture is enough to cover approx. 10 m2 with a dry layer of 60 μm of thick dry layer.
Make sure you have covered the whole area with the base coat and do the shading only on a previously prepared area. Use FADE OUT THINNER to blend the dust that has settled around the repaired surface and to eliminate optical gloss differences between the old lacquer and the newly applied acrylic clear coat.
Usually polishing is unnecessary, SPARK 27 VHS Acrylic Clear Coat gives the surface a perfect look immediately after application. If there are any impurities inclusions it is recommended to remove them and next polish with polishing compound.
– Do not exceed recommended doses of hardener!
– The best repair results can be achieved at room temperature. Temperature in body shop and temperature of a product should be the same.
– When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
– Clean the guns and equipment immediately after use.
– The rooms should be well ventilated.
– Tools should be cleaned just after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.