NEWSLETTER

Soft Extra

Soft filling polyester putty

Variants

ColorArt. no.Ccapacity Quantity in box
creamy2109400 g18
creamy1178 1 kg10
creamy12641,8 kg10
creamy12344,5 kg4

Gloss grade

matt
Soft Extra

Video

Description

Soft in work, filling polyester putty to medium and large holes. Very flexible and easy to sand. Creamy texture allows for good shaping.

Advantages

  • Very easy sanding.
  • Easy to mix and apply
  • Appropriate hardness with good flexibility.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Steel and aluminum after flatting and degreasing,
  • Zinc coated steel after flatting and degreasing,
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition,

We recommend sandpaper with gradations: P80÷P120.

Caution:  Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 7 min. / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Soft sanding polyester putty for car body repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Putty: 100
    Hardener: 2

    Stir thoroughly until achieving homogenous paste to not create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 5mm.

    Pot life is 4÷7 minutes at 20°C

  • Żywotność mieszanki Czas utwardzania
  • Hardening time

    20÷30 minutes at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120,
    Finishing sanding (dry): P120÷P320.

  • Suszenie promieniem IR
  • IR Drying

    5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
    Do not exceed the temperature of 60°C.
    Use as recommended by the equipment manufacturer.
    Wait about 5 min before the IR drying process.

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester putties.
    • 2K polyester spray fillers.
    • 2K acrylic fillers.
    • 2K epoxy fillers
  • Informacja
  • General notes
    • Excessive amounts of hardener will cause problems with bleaching of the top coat!
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.
    • Use personal protection equipment during the 2K products application. Protect
      eyes and respiratory system.

    Caution: To maintain safety, always follow the instructions given in the MSDS for
    the products.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top