NEWSLETTER

K-30 Zn

Polyester-epoxy putty for zinc coated steel

Variantes

CouleurCode produitContenance Quantité/carto
light green93851l10

Degré de brillance

mat
K-30 Zn

Documentation technique

Video

Informations importantes concernant l'utilisation du produit

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 5 min. / 20°C

  • Czas utwardzania

    Hardening time
    16 ÷ 26 min. / 20°C

  • Szlifowanie

    P100 ÷ P150
    P180 ÷ P320

Processus d'appliquation

  • Zastosowanie
  • Use

    Fine and easy to work with putty for quick car body repairs. Dedicated for zinc-coated steel.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Putty: 100
    Hardener: 2

    Stir thoroughly until achieving homogenous paste to not create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should dry throughdo not exceed the thickness of 3mm.

    Pot life is 4÷5 minutes at 20°C

  • Czas utwardzania
  • Hardening time

    16÷26 minutes at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P100÷P150,
    Finishing sanding (dry): P180÷P320.

  • Suszenie promieniem IR
  • IR Drying

    5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
    Do not exceed the temperature of 60°C.
    Use as recommended by the equipment manufacturer.

    Caution: Wait about 5 minutes before the IR drying process

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester putties.
    • 2Kpolyester spray fillers.
    • 2K acrylic fillers.
    • 2K epoxy fillers.
  • Informacja
  • General notes
    • Excessive amounts of hardener will cause problems with bleaching of the top coat!
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.
    • Use personal protection equipment during the 2K products application. Protect
      eyes and respiratory system.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Formulaire de renseignements



       
    Voir aussi d'autres produits
    Wyjście 
    Go to top