UBS Anti-gravel

Car body protection

1 8

Share product information

Variants

color

art. nr.

weight

quantity per carton

black

300001986

1200 g

12

white

300001985

1200 g

12

grey

300001987

1200 g

12

Gloss grade

matt

1 8

Share product information

Description

Product based on synthetic resins designed to protect the car body against the harmful effects of gasoline, oil, water and salt. Creates a strong, flexible layer for maximum stone chip protection. Features sound-absorbing and soundproofing properties. It does not contain asphalts and bitumen. Can be over coated with any acrylic varnish.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Polyester laminates,
  • Poyester putties,
  • Epoxy primers,
  • 2K acrylic primers,
  • Steel substrates,
  • Stainless steel substrates,
  • Aluminum substrates,
  • Zinc coated substrates,
  • Wash primers,
  • Plastic.

In the case of plastic, it is recommended to heat the element at 50 ° C before application of te UBS antigravel. This will facilitate the removal of silicone from the plastic surface.

Good surface preparation is essential to achieve the best repair results.

Important informations

shake before use

layers
2÷3

between layers
5 min.

drying time
40 - 60 min. / 20°C

Application process

Substrates and surface preparation

The product has very good adhesion to various substrates. It can be applied over:

- Polyester laminates,
- Poyester putties,
- Epoxy primers,
- 2K acrylic primers,
- Steel substrates,
- Stainless steel substrates,
- Aluminum substrates,
- Zinc coated substrates,
- Wash primers,
- Plastic.
Polyester laminates should be degreased, dry sanded (P80-P120) and degreased again.
Polyester putties should be dry sanded (P120).
Primers should be degreased, dry sanded (P220-P280) and degreased again.
Steel surfaces should be degreased, dry sanded (P80-P120) and degreased again.
Stainless steel should be degreased.
Aluminium and zinc surfaces should be degreased, dulled with the abrasive cloth and degreased again.
Old coatings should be degreased, dry sanded (P220-P280) and degreased again.
Plastic surfaces should be washed with detergent, dulled with abrasive cloth and degreased.
It is recommended to heat plastic panels to 50°C, which helps to remove silicone from the surface.

Good surface preparation is essential to achieve the best repair results.

Use

Shake before use!
Apply 2 or 3 layers with interval of 5-10 minutes between each layer.
If applied directly on steel, it is recommended to apply top coat or enamel first.

Spray gun parameters: nozzle 4mm; pressure 2-4 bar
Layer thickness: about 100μm for each layer
Drying time: 40-60 minutes at 20°C.
Over Coating: clear coat can be applied 1 hour after the last layer has been applied.
Caution: To maintain safety, always follow the instructions given in the Safety Data Sheet for the product.

Questions and answers

Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.

Ask about this product