Variants
color
art. nr.
capacity
quantity in box
straw, transparent
1594
1 l
6
Gloss grade
semi-gloss
Technical documentation
Description
Ready to use, 1K filler for car body repairs. Dedicated especially to plastics as a adhesion promoter.
Advantages
- Perfect adhesion to plastics.
- Easy application.
- Very short hardening time.
Substrates
It is designed to be applied on surfaces made of various kinds of plastic, especially polypropylene, PP, and its mixtures.
Note: The coating does not improve the adhesiveness to the surfaces made of polyethylene, PE.
The surface designed for painting should be carefully degreased with detergent and wiped with abrasive non woven fabric in advance. Then it should be again cleaned with detergent, rinsed with water and dried with air.
It is recommended to heat the element at the temperature of 500 C prior to commencing painting work, which will help to remove silicone compounds from its surface.
Important informations
degrease
spray viscosity
10÷12 sec in 20°C
1÷2 layer
HVLP / RP
ø1,3 ÷ 1,4 mm
ø1,2 ÷ 1,4 mm
between layers
5÷10 min
before baking
10 min
hardening time
approx. 3÷4 h in 20°C.
approx. 30 min in 60°C.
Do not sand!
Do not sand!
Use
For car repairs as an interlayer improving adhesiveness of coatings and paints to the surface made of plastics.
Spraying viscosity
10÷12 seconds at 20°C
The product delivered in the ready to use form.
Number of layers
1-2 layers, total dry thickness 15 µm
RP gun parameters:
Nozzle: 1,2÷1,4 mm, Pressure: 2,0÷2,2 bar
HVLP gun parameters:
Nozzle: 1,3÷1,4 mm; Pressure: 2,0 bar
Evaporation time
Between layers: 5÷10 minutes
Evaporation time depends on the temperature and layer thickness
Drying time
Approx. 15 min. at 20°C
Temperature below 20°C significantly increases the drying time.
Do not sand!
Further work
1K Plastic Primer can be directly over coated with:
- 2K acrylic fillers.
- 2K acrylic top coats.
- 1K base coats.
- 1K paints.
General notes
- The best repair results you can achieve at room temperature. The temperature in the body shop and the temperature of the product should be the same.
- The rooms should be well ventilated.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.