Ultra Fast Drying HS 2:1

Urethane clearcoat VOC 2.1

Variants

Art. no.CapacityQuantity per carton
137281 l6
20055 l4
hardeners
137290,5 l6
16732,5 l4

Gloss grade

very high gloss
Ultra Fast Drying HS 2:1

Technical documentation

Description

2K high solids premium urethane clearcoat with ultra fast hardening time for spot and panel top coating. Clearcoat with very easy application, exceptional clarity and superior finish. Offers very fast drying parameters – ready to assemble in 90 min. of being air dried at 68° F. Perfect gloss, no need to bake and ready in no time!

Important informations

  • Proporcje mieszania

    Mixing ratio
    by volume – 2 : 1
    by weight – 100 : 56,1

  • Informacja

    Dilution
    not required

  • Lepkość natryskowa

    Viscosity
    16 ÷ 17 s / 68°F

  • Żywotność mieszanki

    Pot life
    60 min / 68°F

  • Liczba warstw

    Application
    2 x 1
    HVLP / RP
    Ø1,2 ÷ 1,4 mm

  • Czas odparowania

    Flash off time between layers
    8 ÷ 10 min

  • Czas utwardzania

    Curing time
    90 min / 68°F

  • Czas życia

    Recommended thickness of a single layer
    50 μm

Application process

  • Zastosowanie
  • Use

    For car body repair.

  • Proporcje mieszania
  • Mixing ratio by volume

    Clear Coat: 2 parts
    Hardener: 1 part
    This clear coat does not require thinner!

  • Lepkość natryskowa
  • Spraying viscosity

    16÷17 seconds at 20°C (68°F)/DIN4.

  • Żywotność mieszanki
  • Pot life

    60 minutes at 20°C (68°F)/DIN4.

  • Czas odparowania
  • Evaporation time

    Between layers: 8÷10 minutes

  • Liczba warstw
  • Number of layers

    Number of spray coats: 2 wet coats.
    Dry film thickness: about 50÷60 μm (1,97÷2,36 mils).

    Gun parameters:
    RP nozzle:
    Gravity Feed: 1,2÷1,4mm (0,047÷0,055 inches);
    Spraying Pressure: 2,0÷2,5 bar (29÷36,3 psi).

    HVLP nozzle:
    Gravity Feed: 1,3÷1,4mm (0,047÷0,055 inches);
    Spraying Pressure: 0,7 bar (10,1 psi).

  • Czas utwardzania
  • Hardening time

    Dust free: after approx. 15 minutes
    Touch free: after approx. 30 minutes
    Ready to installation: after approx. 90 minutes
    Temperature below 20°C (68°F) significantly increases the hardening time

  • Suszenie promieniem IR
  • IR Drying

    7÷15 minutes short waves, depending on applied layer thickness, ambient temperature and the type of equipment (short wave infrared lamp). Comply with the recommendations of the manufacturer.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top