Rangers VOC 2.6

Bedliner with structure effect

Variants

ColorArt. no.CapacityQuantity per carton
black12793800 ml set4
tintable12879800 ml set4
Slip Resistance Additive30000857910 g24
Rangers VOC 2.6

Technical documentation

Description

RANGERS provides great protection against the toughest mechanical and chemical damages. Creates an extremely strong and durable 2K urethane coating recommended for pick-up trucks, heavy-duty commercial vehicles, off-road vehicles, caravans, suvs, etc. The product gives a structure effect and is available in black and tintable version. Any color can be added to the tintable Rangers version using a basecoat or pigments (detailed instructions available in TDS sheet). Can be applied with an UBS antigravel gun or conventional gravity feed gun with addition of reducer.

Why choose Troton Rangers:

• Very tough durable coating
• Great chemical resistance (oil, gasoline, water, salt)
• Great mechanical resistance (scratches, stains)
• Contains UV filters preventing color fading
• Resistant to high temperatures and climatic conditions
• High anti-corrosion protection (anticorrosive agents in formulation)
• Soundproofing properties
• Can be applied in thick layers
• Anti-slip structure (Troton’s anti – slip additive)

Automotive applications:

• Automotive undercoating and chassis
• Automotive primer – specially in car renovations
• Bed liner
• Body panels
• Trunk interiors
• Suv floor
• Bull bars
• Wheel arches

Application process

  • Informacja
  • UBS gun
  • Proporcje mieszania
  • Mixing ratio by volume 3:1

    Rangers: 600ml
    Hardener: 200ml

    Shake the product before opening. Open the lid, add hardener and close back the lid. Shake very well.

  • Żywotność mieszanki
  • Pot life

    About 1h at 20°C(68°F)/DIN4

  • Czas utwardzania
  • Hardening time

    Dust dry: 1 h/ 20°C (68°F)
    Touch dry – ready for assembly: 3 days/20°C (68°F)
    Through dry (severe conditions):
    7 days/20°C (68°F)

    Temperatures below 20°C (68°F) significantly increase the hardening time.

    Baking

    In order to accelerate the physical drying time we recommend baking under a maximum temperature of 45°C (113°F) for 50-60 minutes. Before baking wait the appropriate evaporating time of 1,5 to 2 hours after application.

    ATTENTION! Baking does not accelerate the dry through time. It is recommended to wait 7 days to achieve total hardness of the coating (under severe conditions).

  • Liczba warstw
  • Number of layers

    2 layers.
    1 dry layer of approx. 150µm (5,9mils).

    1. First layer – spray evenly with sweeping motion and pressure of 2-4 bar (29÷58 psi) until the proper coverage is obtained. The distance from the surface to be painted should be of 50cm (19,69 inches).
    2. Allow to flash off for 30÷50 minutes between coats.
    3. In order to obtain the desired texture reduce the pressure and increase the distance from the surface to be painted.

    To achieve fine texture, apply the second layer with a fine mist spray by reducing the pressure and material flow.

    The distance from the object and pressure change the created structure. 

  • Informacja
  • Gravity feed spray gun
  • Proporcje mieszania
  • Mixing ratio by volume 3:1+10÷20%

    Rangers: 600ml
    Hardener: 200ml
    Thinner: 80÷160ml

    Shake the product before opening. Open the lid, add hardener and close. Shake very well.  Add thinner and shake again until all elements have been incorporated.

  • Żywotność mieszanki
  • Pot life

    About 1 h at 20°C (68°F)/DIN4.

  • Czas utwardzania
  • Drying time

    Dust dry: 1 h/ 20°C (68°F)
    Touch dry – ready for assembly: 3 days/ 20°C (68°F)
    Through dry (severe conditions): 7 days/ 20°C (68°F)

    Temperatures below 20°C (68°F) significantly increase the hardening time.

    Baking

    In order to accelerate the physical drying time we recommend baking under a maximum temperature of 45°C (113°F) for 50-60 minutes. Before baking wait the appropriate evaporating time of 1,5 to 2 hours after application.

    ATTENTION! Baking does not accelerate the dry through time. It is recommended to wait 7 days to achieve total hardness of the coating (under severe conditions).

  • Number of layers

    2 layers.
    1 dry layer of approx. 50µm (1,96 mils)

    Parameters for gravity feed gun

    Nozzle: 1,4÷2,5 mm (0,055÷0,0984 inches);  Inlet pressure: 2,0 bar (29  psi).

    1. First layer – spray evenly with sweeping motion, pressure of 2 bar (29 psi) until the proper coverage is obtained. The distance from the surface to be painted should be of 40cm (15,75 inches).
    2. Allow to flash off for 30÷50 minutes between coats.
    3. In order to obtain the desired texture reduce the pressure and increase the distance from the surface to be painted.

    To achieve fine texture, apply the second layer with a fine mist spray by reducing the pressure and material flow.

    The distance from the object and pressure change the created structure.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top