Universal

High-filling polyester putty with reduced styrene content

Variants

Art.No.ColourCapacityQuantity per carton
18123white1 l6
Universal
New

Technical documentation

Description

High-filling polyester putty recommended for repairing medium and large depth dents. It provides excellent filling properties and a high quality finish. Universal in use. Very easy to apply and sand. It features great adhesion to all kinds of surfaces, including galvanized steel and aluminium.

Advantages

  • Contains <10% styrene.
  • High build power.
  • Easy and smooth application.
  • Good sanding properties.
  • Very good adhesion to metal.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers as well as existing coatings in good condition.
  • Well sanded old or factory top coats.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 6 min. / 20°C

  • Czas utwardzania

    Hardening time
    20÷30 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Polyester body filler for car body repair.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life is 4÷6 min. at 20°C

  • Czas utwardzania
  • Hardening time

    20÷30 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Sanding

    Coarse sanding (dry): P80÷P120.
    Final sanding (dry): P120÷P320.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top