Variants
art. nr.
capacity
quantity in box
13549
1 l
6
13551
5 l
4
hardener for clear coat
standard 13553
0,5 l
6
standard 13555
2,5 l
4
fast 14035
0,5 l
6
fast 14037
2,5 l
4
Gloss grade
high gloss
Description
High quality bicomponent acrylic transparent clear coat for fast repairs with high content of solid compounds (>55%).
Characterised by short drying time, excellent flow and easy application. Might be used for spot and full body car repairs. Creates great looking surface, giving it very high gloss.
Advantages
- Very high solids content >55%.
- High gloss and great color depth.
- Easy application and exxcellent flow.
- Very good spray mist absorption.
Substrates
Acrylic clear coats can be applied over:
- Base coats.
- Old finishes in good condition after matting and degreasing.
For dulling the color we recommend the following :
- grey abrasive cloth with matting compound.
- sanding paper with gradation of 600÷800 (for dulling on wet).
- sanding paper with gradation of 360÷500 (for dulling by machine).
Important informations
degrease
mixing ratio
2 : 1 + 0÷5%
spray viscosity
17 ÷ 19s / 20°C
pot life
3,5 h / 20°C (hard. standard)
2 h / 20°C (hard. fast)
1,5÷2x1 layer
HVLP / RP
ø1,3 ÷ 1,4 mm
1,2÷1,4mm
between layers
approx. 5-10 min.
before baking
approx. 10 min.
hardening time
40 min. / 20°C
10 min. / 60°C
(for standard hardener)
Use
Fast body car repairs which require permanent finish.
Mixing ratio by volume
Clear Coat: 2
Hardener: 1
Thinner for acrylic system: 0÷5%
Spraying viscosity
17÷19 seconds in 20°C DIN4
Pot life (double viscosity, clear coat is not suitable to use)
3,5 hour in 20°C (hardener standard)
2 hours in 20°C (hardener fast)
Number of layers
Number of layers: 1,5÷2x1
Gun parameters
RP Nozzle: 1,2÷1,4mm; Pressure: 2,0÷2,2 bar.
HVLP Nozzle: 1.3÷1,4mm; Pressure inside the nozzle: 2,0 bar.
Caution: follow the gun producer instructions.
Application process:
- 1,5 layer – 1 middle, thin, then full layer with keeping the distance of 2 min. for evaporation between the layers, to obtain the thickness of a dry film 50-60 µm,
- 2 layers – 2 full layers with evaporation time 5-10 min., to obtain the thickness of a dry film 60-75 μm,
Evaporation time
Standard
Between layers: 5-10 min
Before baking: 10 min
Fast:
Between layers: 5-10 min
Before baking: 10 min
Curing time
At 20°C
Dust free: 40 minutes.
Touch free: 3 hours
Useful hardness: 13 hours
Complete hardness: 7 days
At 60°C
Dust free: 10 minutes.
Touch free: 15 minutes
Useful hardness: 15 min + 4 hrs /20°C
Complete hardness: 15 min + 4 days /20°C
Temperatures below 20°C significantly decrease the drying time.
IR Drying
10 ÷ 15 minutes of short waves, depending on the layer thickness and the type of radiator.
Do not exceed 60°C.
Use as recommended by the equipment manufacturer.
Wait about 10 minutes before starting the heater drying.
Product efficiency
1 liter of mixture is enough to cover approx. 10 m2 with a dry layer of 60 μm of thick dry layer.
Shading
Make sure you have covered the whole area with the base coat and do the shading only on a previously prepared area. Use FADE OUT THINNER to blend the dust that has settled around the repaired surface and to eliminate optical gloss differences between the old lacquer and the newly applied acrylic clear coat.
Polishing and removing impurities inclusions
Usually polishing is unnecessary, SPARK 27 VHS Acrylic Clear Coat gives the surface a perfect look immediately after application. If there are any impurities inclusions it is recommended to remove them and next polish with polishing compound.
General notes
- Do not exceed recommended doses of hardener!
- The best repair results can be achieved at room temperature. Temperature in body shop and temperature of a product should be the same.
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
- Clean the guns and equipment immediately after use.
- The rooms should be well ventilated.
- Tools should be cleaned just after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.