C2007 UHS 2:1

Urethane clearcoat

Variants

Art. No.CapacityQuantity per box
179161 l6
179175 l4
hardeners
medium179180,5 l6
medium179192,5 l4
fast179200,5 l6
fast179222,5 l4
slow179230,5 l6
slow179242,5 l4

Gloss grade

high gloss
C2007 UHS 2:1

Technical documentation

Description

This premium-quality 2K urethane clearcoat features an ultra-high-solids formula designed for professional automotive refinishing. Ideal for complete vehicle refinishing, it provides excellent flow and leveling, outstanding gloss and a smooth, high-quality finish. Its excellent resistance to UV rays and harsh weathering conditions helps maintain a long-lasting appearance and protection. The ready-to-use formula requires no reducer, making it easy to mix and apply.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Proporcje mieszania

    Mixing ratio
    2 : 1

  • Lepkość natryskowa

    Spraying viscosity
    18 ÷ 20 s / 68°F

  • Żywotność mieszanki

    Pot life
    1,5 h / 68°F

  • Liczba warstw

    2 layers
    HVLP / RP
    ø1,2 ÷ 1,4 mm

  • Czas odparowania

    between layers
    7 ÷ 8 min

  • Czas odparowania

    before baking
    15 min

  • Czas utwardzania

    Drying time
    30 min / 140°F

Application process

  • Zastosowanie
  • Use

    Paint repairs on small and large surfaces.

  • Proporcje mieszania
  • Mixing ratio by volume

    Clearcoat: 2
    Hardener: 1
    Thinner for acrylic systems: 0%

  • Lepkość natryskowa
  • Spraying viscosity

    18 ÷ 20 sec at 20°C

  • Liczba warstw
  • Gun parameters

    2 thin layers, dry film thickness: about 60 μm.
    RP gun parameters
    Nozzle: 1,2 ÷ 1,4 mm; Pressure: 2,0 ÷ 2,2 bar.
    HVLP gun parameters
    Nozzle: 1,3 ÷ 1,4 mm; Inlet pressure: 2,0 bar.

  • Czas odparowania
  • Flash off time

    Between layers: 7 – 8 min
    Before baking: 15 min

  • Czas utwardzania
  • Drying time

    Drying time at 20ºC
    Dust free: about 35 ÷ 40 min.

    Drying time at 60°C
    Clearcoat is ready to polish after baking for about 30 minutes and approx. 2 hours after cooling of the coating.

    Temperatures below 20°C significantly increases the drying time.

  • Suszenie promieniem IR
  • IR drying

    15 ÷ 20 minutes under short wave depending on the total thickness and type of radiator. Do not exceed maximum temperature of 60°C. Use according to the recommendations of the equipment manufacturer. Wait about 10 minutes before starting IR drying.

  • Informacja
  • Performance

    1 liter of mixture is enough to cover 10 ÷ 12 m2 with a dry layer with thickness of 50 ÷ 60 μm.

  • Informacja
  • Polishing and eliminating defects

    Usually polishing is unnecessary, as the C2007 UHS 2:1 gives the surface a perfect finish immediately after application. However, if some dirt inclusions appear, we recommend removing them and then polishing the surface with an abrasive compound.

  • Informacja
  • General notes
    • Do not exceed recommended doses of the hardener!
    • The best repair results can be achieved by painting at room temperature. The temperature in the body shop and the temperature of the product should be similar.
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and airways.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top