Very lightweight and filling polyester body filler

1 8

Share product information



art. nr.


quantity per carton



1000 ml




3 l


Gloss grade


1 8

Share product information


High-quality lightweight polyester body filler designed for filling medium-sized defects and leveling surfaces during car body repairs.  Characterized by its low viscosity and exceptionally fluid consistency. Suitable for application on large surfaces and in thin layers with good leveling effect.

Premium lightweight polyester body filler for medium depth filling and finishing in car body repair. Features low viscosity with excellent fluidity giving this products an unique flowable consistency. Suitable for application in large areas and in thin layers with good leveling effect.

  • Easy spreading
  • Application on large surfaces
  • Very easy sanding


  • Loose consistency.
  • Very low density allowing application on large surfaces.
  • Very easy mixing and application process.
  • Exceptional sanding quality.


The product has very good adhesion to various substrates. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

Caution:  Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations


mixing ratio by weight
100 : 2

pot life
6 ÷ 7 minutes

drying time
25 ÷ 35 min

P100 ÷ P180
P180 ÷ P280

Application process


Very lightweight polyester body filler for car body repairs.

Mixing propotion by weight

Body filler: 100 parts
Hardener: 2 parts
Stir thoroughly until a homogenous paste is obtained. Be careful not to create air inclusions.

Layer thickness

Putty can be applied in several thin coats. After each of them the product should cure. Do not exceed the thickness of 3 mm.

Pot life is 6÷7 minutes at 20°C

Drying time

25÷35 minutes at 20°C.

Temperatures below 20°C significantly increase the drying time.


Coarse sanding (dry): P100÷P180,
Finish sanding (dry): P180÷P280.

IR Drying

5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
Do not exceed the temperature of 60°C.
Use as recommended by the equipment manufacturer.

Caution: Wait about 5 minutes before the IR drying process

Further work

Polyester body fillers can be over coated with:
- 2K polyester putties.
- 2K polyester spray fillers.
- 2K acrylic primers.
- 2K epoxy primers.
- 2K wash primers.

General notes

- Excessive amount of hardener will cause problems with bleaching of the topcoat!
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
- Clean the guns and equipment immediately after use.
- The rooms should be well ventilated.

Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Questions and answers

Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.

Ask about this product