Gold Plus

Universal filling polyester body filler

Variants

Art. No. Colour Capacity Quantity per box
1745beige 500 ml10
2468 beige1000 ml10

Gloss grade

matt
Gold Plus

Video

Description

Universal polyester body filler designed for car repairs. Combines the features of a filling and finishing putty. It is suitable for filling both large cavities as well as small scratches and holes by applying thin layers.

Advantages

  • Smooth surface after sanding
  • Very good adhesion to various types of substrates
  • Easy application
  • Very good sanding

Substrates

Product shows very good adhesion to various substrates. It can be applied on:

  • Steel and aluminum after matting and degreasing
  • Zinc coated steel after matting and degreasing
  • Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic and epoxy primers, old paint coatings in good condition.

Caution: Do not apply body fillers directly on reactive primers, 1-component acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 6 min. / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 25 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P280

Application process

  • Zastosowanie
  • Use

    Universal filling and finishing body filler dedicated for car body repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body Filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life 4÷6 min. at 20°C.

  • Czas utwardzania
  • Hardening time

    20÷25 min. at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Finishing sanding (dry): P120÷P280.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Futher work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



    

    Related products

     

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top