NEWSLETTER

Unifill

Strong filling polyester body filler

Variants

nr art. color capacity quantity per carton
6670cream colored500 ml10
6669cream colored1000 ml10

Gloss grade

matt
Unifill

Video

Description

High-quality strong filling polyester putty for car repairs. Recommended for repairing large dents and unevenness, also on vertical surfaces. Universal in use and easy to apply with very good adhesion to various types of surfaces

Advantages

  • Strong and durable filling.
  • Very good adhesion to metal.
  • Minimal surface tack.
  • Creamy consistency.
  • Exceptional sanding

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and polyester primers as well as existing coatings in good condition.

We recommend sandpaper with gradations: P80÷P120.

Caution

Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    mixing ratio by weight
    100 : 2

  • Czas życia

    pot life
    4 ÷ 5 minutes
    20°C

  • Czas utwardzania

    drying time
    15 ÷ 26 min
    20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P280

Application process

  • Zastosowanie
  • Use

    Universal polyester filling putty for quick car repairs.

  • Mieszanie wg wagi
  • Mixing propotion by weight

    Putty : 100 parts
    Hardener: 2 parts
    Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should cure. Do not exceed the thickness of 3 mm.

    Pot life is 4÷5 minutes at 20°C

  • Czas utwardzania
  • Hardening time

    16÷26 min. at 20°C.
    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120,
    Finishing sanding (dry): P120÷P280.

  • Suszenie promieniem IR
  • IR Drying

    5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
    Do not exceed the temperature of 60oC.
    Use as recommended by the equipment manufacturer.

    Caution: Wait about 5 minutes before the IR drying process

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester putties.
    • 2K polyester spray fillers.
    • 2K acrylic fillers.
    • 2K epoxy fillers.
  • Informacja
  • General notes
    • Excessive amount of hardener will cause problems with bleaching of the topcoat!
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
    • Clean the guns and equipment immediately after use.
    • The rooms should be well ventilated.

    Caution: To maintain safety, always follow the instructions given in the MSDS for
    the products.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top