Multifunctional polyester body filler


Art. No. Colour Capacity Quantity per box
7358light beige1000 ml10
4937light beige1500 ml8
7662light beige 3000 ml4

Gloss grade




Multifunctional lightweight polyester body filler for fast car body repair. Combines high filling and finishing qualitites in one product. Ideal for the repair of medium and small damages. Thanks to its light weight can be applied on large surfaces, ensuring smooth finish and easy sanding.


  • Very smooth surface after sanding
  • Exceptional quality and fast sanding
  • Creamy consistency
  • Ideal for creating shapes
  • Low density allows the application on lage surfaces


Product shows very good adhesion to different substrates. It can be applied on:

  • Steel and aluminum after matting and degreasing
  • Zinc-coated steel after matting and degreasing
  • Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic primers and nitrocellulose.

Important informations

  • Przetrzeć odtłuścić


  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 5 min. / 20°C

  • Czas utwardzania

    Hardening time
    16 ÷ 26 min. / 20°C

  • Szlifowanie

    P120 ÷ P180
    P220 ÷ P320

Application process

  • Zastosowanie
  • Use

    Lightweight body filler for quick car body repair.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body Filler: 100: 2
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved.
    Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life : 4÷5 min. at 20°C

  • Czas utwardzania
  • Hardening time

    16÷26 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P120÷P180.
    Finish sanding (dry): P220÷P320.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product


    Related products


    Check product tips


    Read more about the product on the blog

    See also other products
    Go to top