Variants
art. nr.
capacity
quantity per carton
13086
1 l
6
13088
5 l
4
hardener for clear coat
standard 13087
0,5 l
6
standard 13089
2,5 l
4
fast 13099
0,5 l
6
fast 13100
2,5 l
4
slow 14259
0,5 l
6
slow 14260
2,5 l
4
Gloss grade
high gloss
Description
High-quality 2K HS acrylic clearcoat for car body repairs with a low content of volatile compounds and increased scratch resistance SR (Scratch Resistant). Features high glossy finish and mechanical resistance.
PERFORMANCE:
1 liter of the mixture is enough to paint 8,5 ÷ 9 m2 of surface with a a thickness layer of 60 μm.
Advantages
- High solids content.
- Very high and stable gloss.
- Paint durability and color depth.
- High hardeness and mechanical resistence.
- Very good overspray absorption.
- Excellent flow and ease application.
Substrates
Acrylic clearcoats can be applied over:
- Basecoats.
- Old paint coatings in good condition after matting and degreasing.
Important informations
degrease
Mixing proportion
2 : 1 + 0 +5%
spraying viscosity
15 ÷ 17s / 20°C
pot life for the mixture
2 h 45 min. / 20°C
2 layers
HVLP / RP
ø1,2 ÷ 1,4 mm
between layers
10 min
before baking
10 ÷ 15 min.
drying time
30 min. / 60°C
(for standard hardener)
Use
For car body repair that require a durable finish.
Mixing proportion per volume
Clearcoat: 2
Hardener: 1
Thinner for acrylic systems: 0-5%
Spraying viscosity
15÷17 seconds at 20ºC
Pot life for the mixture
about 2 hours and 45 minutes at 20ºC
Number of layers
Number of layers: 2 full layers; about 60 µm of dry coating.
Gun parameters
RP Nozzle: 1,3÷1,4mm; Pressure: 2,0÷2,2 bar.
HVLP Nozzle: 1.3÷1,4mm; Inlet pressure: 2,0 bar.
Caution: Follow the recommendations of the equipment manufacturer.
Flash off time
Between layers: about 10 min
Before baking: about 10-15 minutes
Drying time for standard hardener
Dust dry: about 60 min./20°C
Baking at 60°C: (panel temp) 30 minutes
Ready for polishing: after drying overnight.
Temperatures below 20°C significantly increase the drying time.
IR Drying
10÷15 minutes under short wave depending on the total thickness and type of radiator.
Do not exceed maximum temperature of 60°C.
Use according to the recommendations of the equipment manufacturer.
Wait about 10 minutes before starting IR drying.
Performance
1 liter of the mixture is enough to paint 8,5÷9 m2 of surface with a layer thickness of 60 μm.
Shading
Make sure you have covered all the surface with the clear coat. You should only shade the surface that has been covered and treated. Use InterTroton FADE OUT THINNER to clean any dust or dirt from the surface and to level out the optical gloss differences between the older and new applied coating.
Polishing and eliminating defects
Usually polishing is unnecessary, as the C38 VHS Clear Coat 2:1 gives the surface a perfect finish immediately after application. However, if some dirt inclusions appear, we recommend removing them and then polishing the surface with an abrasive compound.
General notes
- Do not exceed recommended doses of the hardener!
- The best repair results can be achieved by painting at room temperature. The temperature in the body shop and the temperature of the product should be similar. When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and airways.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.
