NEWSLETTER

Hybrid

Polyester-epoxy body filler for zinc coated steel

Variants

Art. No. ColorCapacity Quantity per carton
6664 white1000 ml10

Gloss grade

matt
Hybrid

Technical documentation

Video

Description

Fine grained polyester and epoxy body filler dedicated for quick car body repair. Product designed specially for application on zinc coated steel. Guarantees maximum adhesion to metal, great filling properties and easy application.

Advantages

  • Excellent adhesion to metal
  • Exceptionaly smooth surface after sanding
  • Easy and fast application
  • Creamy consistency

Substrates

Product shows very good adhesion to various substrates. It can be applied on:

  • Steel and aluminum after matting and degreasing
  • Zinc coated steel after matting and degreasing
  • Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic and epoxy primers, old paint coatings in good condition.

Caution: Do not apply body fillers directly on reactive primers, 1-component acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing proportion by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 5 min. / 20°C

  • Czas utwardzania

    Drying time
    16 ÷ 26 min / 20°C

  • Szlifowanie

    P100 ÷ P150
    P180 ÷ P320

Application process

  • Zastosowanie
  • Use

    Fine grained easy to use body filler dedicated for fast car body repair. Specially recommended for zinc coated steel.

  • Mieszanie wg wagi
  • Mixing propotion by weight

    Body Filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Coating thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life 4÷5 min. at 20°C

  • Czas utwardzania
  • Drying time

    16÷26 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P100÷P150.
    Finish sanding (dry): P180÷P320.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



     

    Check product tips

    

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top