Repair set

Repair set


art. no.capacityquantity per carton
1188250 g resin + hardener + glass mat 0,25m212
2323 (fast)250 g resin + hardener + glass mat 0,25m212

Gloss grade

Repair set


Set with constructional polyester resin for manual laminating, hardener and glass mat. Designed for big damage repairs on car body, caravans, trailers and yachts. Available in version standard and fast.


  • Very good adhesion to metal.
  • Very durable and flexible.
  • Minimal layer crunch.
  • High sanding quality.


Product has very good adhesion to various substrates.  It can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

Caution:  Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Important informations

  • Proporcje mieszania

    mixing ratio
    100 : 4

  • Czas żelowania

    gel time
    19 ÷ 21 min. / 20°C

  • Czas utwardzania

    hardening time
    35 ÷ 45 min. / 20°C

  • Szlifowanie

    P80 ÷ P120

Application process

  • Zastosowanie
  • Use

    Dedicated especially to big damage repairs and corroded parts of car body.

  • Proporcje mieszania
  • Mixing ratio per weight

    Resin 100
    Activator 4

    Stir accurately.

  • Liczba warstw
  • Layer thickness

    Few layer can be applied.

  • Czas żelowania
  • Gel time

    19-21 min. in 20°C

  • Czas utwardzania
  • Hardening time

    35÷45 min. in 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarsing sanding (dry): P80÷P120.

  • Informacja
  • 1/Prepare a suitable piece of glass mat so that it extends approx. 2 cm beyond the repaired area.
    2/Apply the resin mixed with the hardener with a brush.
    3/Put the mat down, press and saturate it with resin using a brush. Several layers can be applied.
    4/Wait approx. 40 minutes. Treat the hardened surface of the laminate machanically or even with a polyester putty.
    5/Minimal application temperature is +10oC.

    NOTE: Do not pour the remaining resin mixed with a hardener into the can.

  • Informacja
  • Further works

    Polyester laminates can be covered directly by:
    – 2K polyester putties,
    – 2K polyester spray putties,
    – 2K epoxy putties.
    – 2K acrylic fillers.
    – 2K epoxy fillers.

  • Informacja
  • General notes

    – Use personal protection equipment during the 2K products application.
    – Protect eyes and respiratory system
    – The rooms should be well ventilated.
    – Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the MSDS for
    the products.

Ask about this product

    See also other products
    Go to top