NEWSLETTER

Glass Fibre

Constructional polyester putty reinforced with glass fiber.

Variants

ColourArt. no. Weight Quantity in box
green 13402400 g18
green134031,0 kg10
green134041,7 kg10

Gloss grade

matt
Glass Fibre

Technical documentation

Video

Description

Bicomponent polyester putty reinforced with glass fiber for car body repairs. Especially dedicated to deep dents, damages and wholes in car body, caravans, trailers.

Advantages

  • Very good adhesion to metal.
  • Good hardness with high flexibility.
  • Short hardening time.
  • Good sanding quality.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers.
  • Well sanded existing coatings in good condition.

Caution: Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 7 min. / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Constructional polyester putty highly recommended to deep dents and wholes in car body.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Putty: 100
    Hardener:2

    Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness 5mm.

    Pot life 4÷7 min. in 20°C.

  • Czas utwardzania
  • Hardening time

    20÷30 min. at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120,
    Finishing sanding (dry): P120÷P320.

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester putties.
    • 2K polyester spray fillers.
  • Informacja
  • General notes
    • Excessive amounts of hardener will cause problems with bleaching of the top coat!
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.
    • Use personal protection equipment during the 2K products application. Protect eyes and respiratory system.

    Caution: To maintain safety, always follow the instructions given in the MSDS for
    the products.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top