Multi X

Multifunctional polyester putty with reduced styrene content

Variants

Art.No.ColourCapacityQuantity per carton
18126beige1 l6

Gloss grade

matt
Multi X
New

Technical documentation

Description

Lightweight, multifunctional polyester putty designed for fast car body repair. Combines high filling and finishing properties in one product. Ideal for repairing medium and small damages. Its low density makes it particularly suitable for application over large surfaces.

Advantages

  • Contains <10% styrene.
  • Very smooth surface after sanding.
  • Excellent sanding properties.
  • Easy to mix and apply.
  • Low density.

Substrates

Product shows very good adhesion to different substrates. It can be applied on:

  • Steel and aluminum after matting and degreasing
  • Zinc-coated steel after matting and degreasing
  • Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic and epoxy primers and existing coatings in good condition.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 7 min / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min / 20°C

  • Szlifowanie

    P120 ÷ P180
    P220 ÷ P320

Application process

  • Zastosowanie
  • Use

    Lightweight body filler for quick car body repair.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body Filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life : 4 ÷ 7 min at 20°C

  • Czas utwardzania
  • Hardening time

    20 ÷ 30 minutes at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P120 ÷ P180.
    Finish sanding (dry): P220 ÷ P320.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top