Soft

Easy-sanding, high-filling polyester putty with reduced styrene content

Variants

Art.No.ColourCapacityQuantity per carton
18124light beige1 l6

Gloss grade

matt
Soft
New

Technical documentation

Description

Easy-sanding, high-filling polyester putty designed for deep repairs. Features effortless processing without compromising filling performance. Suitable for applying thick layers without sagging, even on vertical surfaces. Ideal for shaping and repairing surfaces with complex contours.

Advantages

  • Contains <10% styrene.
  • High filling power.
  • Easy sanding.
  • Low surface tack.
  • Easy application without dragging or sagging.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Zinc coated, galvanized steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 7 min / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min / 20°C

  • Szlifowanie

    P100 ÷ P180
    P180 ÷ P280

Application process

  • Zastosowanie
  • Use

    Soft sanding polyester putty for quick car repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body Filler: 100
    Hardener: 2

    Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should cure. Do to exceed the thickness of 5 mm.

    Pot life 4 ÷ 7 min at 20°C.

  • Czas utwardzania
  • Hardening time

    20 ÷ 30 min at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P100 ÷ P180.
    Finish sanding (dry): P180 ÷ P280.

  • Suszenie promieniem IR
  • IR drying

    5 ÷ 7 minutes of short waves, depending on the layer thickness and the type of radiator. Do not exceed the temperature of 60°C. Use as recommended by the equipment manufacturer. Caution: Wait about 5 minutes before the IR drying process drying.

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester putties.
    • 2K polyester spray putties.
    • 2K acrylic primers.
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amount of hardener will cause problems with bleaching of the topcoat!
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
    • Clean the guns and equipment immediately after use.
    • The rooms should be well ventilated.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top