Variants
color
art. nr.
capacity
quantity per carton
ecru
1537
0,5 l
6
white
1525
0,5 l
6
graphite
1491
0,5 l
6
black
1428
0,5 l
6
red
1519
0,5 l
6
grey
1380
0,5 l
6
hardener
1920
0,1 l
6
ecru
1377
0,8 l + 0,16 l hardener
6
white
1578
0,8 l + 0,16 l hardener
6
graphite
1577
0,8 l + 0,16 l hardener
6
black
1418
0,8 l + 0,16 l hardener
6
red
1574
0,8 l + 0,16 l hardener
6
grey
1374
0,8 l + 0,16 l hardener
6
ecru
1540
2,5 l + 0,5 l hardener
4
white
1443
2,5 l + 0,5 l hardener
4
black
1553
2,5 l + 0,5 l hardener
4
red
1431
2,5 l + 0,5 l hardener
4
grey
1404
2,5 l + 0,5 l hardener
4
grey
1334
0,8 l + 0,2 l hardener
6
white
1345
0,8 l + 0,2 l
6
black
1353
0,8 l + 0,2 l hardener
6
grey
9601
3,6 l
4
white
11626
3,6 l
4
black
11627
3,6 l
4
hardener
9602
0,9 l
4
grey
4833
4 l
4
black
6375
4 l
4
white
6376
4 l
4
hardener
4835
1 l
6
Gloss grade
mat
Description
2K high build acrylic primer designed for car body repairs. Universal high filling primer with very good very good adhesion to aluminum surfaces and excellet vertical stability. Available in 7 colors.
Advantages
- Fast drying
- Excellent covering properties
- Easy and fast sanding
Substrates
Acrylic primer 5:1 can be applied over:
- Steel and aluminum after flatting and degreasing.
- Zinc coated steel and galvanized steel after flatting and degreasing.
- anded glass polyester laminates (GFK/GRP).
- Polyester body fillers and putties
- Epoxy primers.
- Wash primers.
- Old coatings in good condition.
- Good surface preparation is essential to achieve the best repair results.
Important informations
degrease
mixing ratio
5 : 1 + 25 ÷ 30%
spraying viscosity
30 ÷ 50s / 20°C
pot life for the mixture
1 h / 20°C
2÷3 layers
HVLP / RP
ø1,5 ÷ 2,0 mm
between layers
~5 min.
before baking
~ 10 min.
drying time
3 ÷ 4 h / 20°C
30 min. / 60°C
P360 ÷ P500
P600 ÷ P1000
Use
High filling primer for car body repair.
Mixing ratio by volume
Primer: 5
Hardener: 1
Thinner: 25÷30%
Mix thoroughly until a homogeneous consistency is obtained.
Spraying viscosity
about 30÷50 seconds at 20°C
Pot life for the mixture
about 1 h at 20°C.
Number of layers
2÷3 layers.
RP gun parameters
Nozzle: 1,6÷2,0 mm; Pressure: 2,0÷2,2 bar.
HVLP gun parameters
Nozzle: 1,5÷1,9 mm; Inlet pressure: 2,0 bar.
Flash off time
Between layers: approx. 5 minutes
Before baking: approx. 10 minutes
Flash off time depends on the temperature and the number of layers.
Drying time for coating thickness of 200 µm
3-4 hours at 20°C
30 minutes at 60°C.
Temperatures below 20°C significantly increases the hardening time.
IR drying
15÷20 minutes under short wave for coating thickness of 150÷200 µm.
Do not exceed maximum temperature of 60°C.
Use according to the recommendations of the equipment manufacturer.
Wait about 10 minutes before starting IR drying.
Dry sanding
Machine sanding: P360÷P500.
Manual sanding: P280÷P320.
Wet sanding
Machine sanding: P600÷P1000.
Manual sanding: P800÷P1000.
Further work
2K acrylic fillers can be directly over coated with:
- 2K acrylic topcoats.
- 1K basecoats.
General notes
- Do not exceed recommended doses of the hardener!
- The best repair results can be achieved at room temperature. The temperature in the body shop and the temperature of the product should be similar
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.
