Variants
color
art. nr.
capacity
quantity in box
beige
300002263
0,8 l
12
hardener
300002261
0,4 l
12
Gloss grade
matt
Description
Bicomponent etch polyvinyl primer with very high anti-corrosion properties for car repairs. Protects steel substrates. Very good adhesion, dedicated especially for ‘wet on wet’ application.
Advantages
- Excellent protection of steel surfaces.
- Good adhesion to various substrates.
- Easy to mix and apply.
- Exceptional flow.
Substrates
Etch primer can be applied over:
- Bare steel and aluminum after flatting and degreasing.
- Zinc coated, galvanized steel after flatting and degreasing.
- Polyester
- Old finishes on good condition after flatting and degreasing
Well prepared surface is necessary for achieving best results.
Following sandpaper gradations are recommended:
- by hand (dry or wet): P280÷P320 (GRP P400),
- by machine (dry): P180÷P220.
Important informations
degrease
mixing ratio by volume
Filler: 2 parts
Hardener: 1 part
do not thin
spray viscosity
18÷20 sec in 20°C
pot life
approx. 48 hrs in 20ºC
1÷2 layer
HVLP / RP
ø1,3 ÷ 1,4 mm
ø1,2 ÷ 1,4 mm
between layers
approx. 10 min
before baking
approx. 20-30 min
Do not sand!
Do not sand!
Use
For car repairs as an anticorrosion primer.
Mixing ratio by volume
Filler: 2 parts
Hardener: 1 part
do not thin
Primer is ready to apply after 10÷15 minutes from mixing with activator!
Spraying viscosity
18÷20 seconds at 20°C
Pot life
Approx. 48 hours at 20°C
Number of layers
1-2 layers,
RP gun parameters:
Nozzle: 1,2÷1,4 mm, Pressure: 2,0÷2,2 bar
HVLP gun parameters:
Nozzle: 1,3÷1,4 mm; Pressure: 2,0 bar
Evaporation time
between layers: approx.10 minutes
before baking: approx. 20-30 minutes
Sanding
Doesn’t require sanding.
Further work
2K wash primers can be directly over coated with:
- 2K acrylic fillers.
- Anti-gravels.
General notes
- Do not exceed recommended doses of hardener!
- The best repair results can be achieved at room temperature. Temperature in body shop and temperature of a product should be the same.
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
- Clean the guns and equipment immediately after use.
- The rooms should be well ventilated.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.