One Step

Polishing compound

Variants

Art. no.	Weight	Quantity per carton
11249	250 g	12
11024	1 kg	6
11386	100 g x 12szt. DISPLAY	1 set

Technical documentation

Description

BRAYT ONE STEP is suitable to all varnishes used in automotive sector, including hard scratch resistant (e.g.ceramic). Product dedicated to fresh and old coatings. It is possible to remove easily scratches and traces made with abrasive paper P2000. It can work with most applicators available on market (foams, microfibers, wools). Doesn’t contain silicone and fillers.

Cut level 6/10
Gloss level 9/10

Advantages

Removes abrasive paper P2000 defects
Works with all applicators
Can work on any surfaces
Does not contain fillers
Can work on fresh and fully polymerized surfaces
Very easy to apply
Possibility to work mechanically and manually
Suitable for manual application in places hard to reach

Processing

manual work
mechanical work (rotary polisher, dual action polisher)

Recommended applicators
- BRAYT POLISHING HARD FOAM yellow
- BRAYT LAMBSWOOL type „D” yellow
- BRAYT LAMBSWOOL type „MM” white
- BRAYT MICROFIBER POLISHING PAD
- BRAYT „JEANS” APPLICATOR for ‘orange peel’ removing
- BRAYT „CORDUROY” APPLICATOR for ‘orange peel’ removing

Application
- In case of hard scratch resistant varnishes apply with wool or hard foam.
- Apply a small amount of product on the surface dedicated to polish.
  In case of new applicator it is recommended to apply the compound also on it and pre-polish.
- Work with the rotary polisher in the optimal speed range 800-1600, with light or medium pression, depending on the surface.
- Polish until all defects will be removed.
- The residues of the compound might be removed with microfiber cloth.
- When large surfaces must be polished it is recommend to work on a smaller fragments, partially.