NEWSLETTER

SPEC High Temp

Polyester putty with increased resistance to high temperatures

Variants

colorart. no. weight quantity per carton
grey 6885 0,5 kg18
grey68904,5 kg1

Gloss grade

matt
SPEC High Temp

Technical documentation

Description

High quality 2K polyester body filler with increased resistance to high temperatures, up to 200oC. Features electrical conductivity. Intended mainly for surface treatment in preparation for powder coating. The product has good flexibility and very good adhesion to various types of surfaces, after appropriate preparation.

Advantages

  • Very good adhesion to metal.
  • Easy sanding.
  • Perfectly smooth surface after sanding.
  • High temperature resistance, up to 200oC.
  • Conducts electricity.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100:2

  • Czas życia

    Pot life
    approx. 6÷8 minutes at 20°C.

  • Czas utwardzania

    Hardening time
    approx. 3-4h / 20°C.
    approx. 2h / 60°C.

  • Szlifowanie

    P80÷P120.
    P120÷P320.

Application process

  • Zastosowanie
  • Use

    High-temperature body fillers intended for filling surfaces that will painted and hardened at temperatures up to 200°C.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body filler : 100
    Hardener : 2

    Stir thoroughly until achieving an uniform mixture. Stir carefully so as not to air the body filler.

  • Czas życia
  • Layer thickness

    Body filler should be applied in several thin layers. Before the application of each additional layer the filler should be cured. Do not exceed total thickness of 5 mm.
    Pot life: approx. 6÷8 minutes at 20°C.

  • Czas utwardzania
  • Hardening time

    Approx. 3-4h at 20°C.
    Approx. 2h at 60°C.
    Body filler top layer tends to stick to the sandpaper. After the initial sanding of the top layer, the clogging wears off.
    Temperatures below 20°C increases significantly the hardening time.

  • Szlifowanie
  • Sanding

    Course sanding (dry): P80÷P120.
    Finishing sanding (dry): P120÷P320.

  • Informacja
  • Further works

    After hardening, the product should be sanded according to the manufacturer’s instructions until a perfectly smooth surface is obtained. It is recommended to wait 12 hours before powder coating. The surface should be cleaned, degreased and primed and then covered with paint.

  • Informacja
  • General notes

    -Excessive amounts of hardener will cause problems with bleaching of the topcoat!
    -The rooms should be well ventilated.
    -Tools should be washed directly after application.
    -Use the efficient personal protection equipment during the 2K products application. Protect the eyes and air passages.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



       
    See also other products
    Wyjście 
    Go to top