Flexible poliester putty for plastic.


ColorArt. no.Capacity Quantity in box
dark grey1216400 g18

Gloss grade




Polyester putty with high flexibility dedicated to car body plastic panels repairs, in particular exposed for vibrations. Shows very adhesion to most types of plastic. Putty has properties of filling and finishing product.


  • Very good adhesion to plastics.
  • Great flexibility.
  • Good sanding properties.
  • Very smooth surface after sanding.


The product has very good adhesion all outer car body parts made of plastic (PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, PUR soft foam, UP-GF).

The Surface should be wiped with non woven fabric, degreased with water and detergent ( do not use benzine based removers as they can melt plastic surfaces) then it should be washed again with water and detergent, rinsed and dried with air.

Caution:  Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić


  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    3 ÷ 4 min. / 20°C

  • Czas utwardzania

    Hardening time
    25 ÷ 35 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Flexible polyester putty for plastic car body repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Putty: 100
    Hardener: 2

    Stir thoroughly until achieving homogenous paste to not create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 3mm.

    Pot life is 3÷4 minutes at 20°C

  • Żywotność mieszanki Czas utwardzania
  • Hardening time

    25÷35 minutes at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120,
    Finishing sanding (dry): P120÷P320.

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester spray fillers.
    • 2K acryl fillers.
    • 2K epoxy fillers.
  • Informacja
  • General notes
    • Excessive amounts of hardener will cause problems with bleaching of the top coat!
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.
    • Use personal protection equipment during the 2K products application. Protect
      eyes and respiratory system.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product

    See also other products
    Go to top