Fast drying and finishing polyester glaze filler

1 8

Share product information



art. nr.


quantity per carton

light green


450 ml


Gloss grade


1 8

Share product information


Top-quality, quick-drying and finishing polyester glaze filler characterized by a very easy application thanks to its “self-levelling” effect. It is designed for car body repairs – ideal for use on large surfaces, and smart fast repairs. Thanks to the use of the latest technology, the putty is distinguished by reduced shrinkage (as much as 95% compared to standard products) and a very short drying time.


  • Instantly ready for sanding (the fastest on the market)
  • Very easy application – self-levelling effect
  • Low specific weight
  • Very easy sanding even after being fully cured
  • Reduced shrinkage of 95% in comparison with other standard glaze fillers
  • Excellent adhesion to zinc coated steel and aluminum


The product shows very good adhesion to various surfaces. It can be applied over:

  • Black steel and zinc coated steel as well as aluminum after flatting and degreasing.
  • Sanded polyester glass fiber laminates (GFK / GRP), polyester body fillers and putties, acrylic and epoxy primers, and old paint coatings in good condition.

Do not apply body fillers directly on reactive primers, 1-component acrylic and nitrocellulose products.

Important informations

Crumple the bag several times, before use, to mix the putty and obtain a homogeneous consistency, than squeeze the putty through the hole.


mixing proportion by weight
100 : 2

pot life
4 ÷ 6 min.

Drying time
16 ÷ 20 min

P100 ÷ P180
P180 ÷ P320

Application process


Light polyester glaze filler dedicated for smart fast repairs of the car body.


Crumple the bag several times, before use, to mix the putty and obtain a homogeneous consistency, than squeeze the putty through the hole.

Mixing propotion by weight

Body Filler: 100
Hardener: 2
Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

Coating thickness

Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried.
Do not exceed a total thickness of 4 mm.
Pot life 4÷6 min. at 20°C

Drying time

16÷20 min. at 20°C.
Temperatures below 20°C significantly increase the drying time.


Coarse sanding (dry): P100÷P180.
Finish sanding (dry): P180÷P320.

IR drying

5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
Do not exceed maximum temperature of 60°C.
Use accordin to the instrusctions of the radiator's manufacturer.
Wait about 5 min. before starting IR drying.

Further work

Polyester body fillers can over coated with:
- 2K polyester body fillers,
- 2K polyester spray fillers,
- 2K acrylic primers,
- 2K epoxy primers.

General notes

- Excessive amounts of hardener may cause problems with bleaching of the topcoat!
- While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
- The rooms should be well ventilated.
- Tools should be washed directly after application.

Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Questions and answers

Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.

Ask about this product