NEWSLETTER

Wash Primer 2:1

Wash primer

Variants

color nr art.capacity quantity per carton
beige300002235 0,8 l6
activator/hardener300002228 0,4 l6

Gloss grade

matt
Wash Primer 2:1

Video

Description

2K etching polyvinyl primer with very high anti-corrosion properties for car repairs. Designed especially for wet-on-wet application.

Advantages

  • Excellent protection of steel surfaces.
  • Very good adhesion to various surfaces.
  • Easy to mix and apply.
  • Exceptionally smooth levelling.

Substrates

Wash Primer can be applied over:

  • Steel and aluminum after matting and degreasing.
  • Zinc coated and galvanized steel after matting and degreasing.
  • Polyester body fillers and putties.
  • Old finishes in good condition after matting and degreasing.

Good surface preparation is essential to achieve the best repair results.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Proporcje mieszania

    mixing ratio
    2 : 1

  • Lepkość natryskowa

    spraying viscosity
    18 ÷ 20s / 20°C

  • Żywotność mieszanki

    pot life for the mixture
    48 h / 20°C

  • Liczba warstw

    1÷2 layers
    HVLP / RP
    ø1,2 ÷ 1,4 mm

  • Czas odparowania

    between layers
    10 min.

  • Czas odparowania

    before coating
    20 ÷ 30 min.

  • Nie szlifować

    does not require sanding

Application process

  • Zastosowanie
  • Use

    For car repairs. As an anti-corrosion primer.

  • Proporcje mieszania
  • Mixing ratio by volume

    Underlay: 2
    Hardener: 1
    Thinner: do not dilute

    The primer is ready for application 10 ÷ 15 minutes after mixing with the activator!

  • Lepkość natryskowa
  • Spraying viscosity

    18 ÷ 20s / 20°C

  • Żywotność mieszanki
  • Pot life for the mixture

    about 48 hours at 20ºC

  • Liczba warstw
  • Number of layers

    1÷2 layers.

    Gun parameters
    RP Nozzle: 1,2÷1,4mm; Pressure: 2,0÷2,2 bar.
    HVLP Nozzle: 1.3÷1,4mm; Inlet pressure: 2,0 bar.

  • Czas odparowania
  • Flash off time

    Between layers: about 10 minutes
    Before overcoating: about 20-30 minutes

    Flash off time dependes on the temperature and layer thickness.

  • Nie szlifować
  • Szlifowanie

    Does not require sanding.

  • Informacja
  • Further work

    2K wash primers can be directly over coated with:

    • 2K acrylic primers.
    • UBS Antigravel.

    Caution: Do not apply polyester body fillers and putties, acrylic topcoats directly on Wash Primers!

  • Informacja
  • General notes
    • Do not exceed recommended doses of the hardener!
    • The best repair results can be achieved at room temperature. The temperature in the body shop and the temperature of the product should be similar
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

    

    Check product tips

     
    See also other products
    Wyjście 
    Go to top