Plastic

Polyester putty with high elasticity

Variants

ColourArt. No.Weight Quantity per carton
dark grey 2376250 g12
dark grey2380 400 g18
dark grey 2374 700 g18

Gloss grade

matt
Plastic

Video

Description

Polyester putty with high elasticity, great adhesion and mechanical resistance. Especilly dedicated for the repair of plastic elements of the car body subject to vibrations.

Advantages

  • Very good adhesion to plastic.
  • Exceptional flexibility.
  • Good sanding properties.
  • Very smooth surface after application and sanding.

Substrates

The product has very good adhesion to all outer plastic panels (PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, PUR soft foam, UP-GF).

Before applying, the surface should be cleaned well with an abrasive needled cloth and degreased with detergent and water (do not use benzene based removers as they can dissolve the surface). Wash again using water and detergent, rinse with pure water and dry with air.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    3 ÷ 5 min. / 20°C

  • Czas utwardzania

    Drying time
    25 ÷ 35 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Flexible polyester putty for the repair of plastic elements of the car body.

  • Mieszanie wg wagi
  • Mixing ratio per weight

    Body filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life 3÷5 min. at 20°C

  • Czas utwardzania
  • Drying time

    25÷35 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Final sanding (dry): P120÷P180.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K acrylic primers,
    • 2K epoxy primers.

    It is recommended to apply 1K Plastic Primer before applying the plastic putty.

  • Informacja
  • General thoughts
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top