colour | art. no. | weight | quantity per carton |
dark grey | 1228 | 250 g | 12 |
dark grey | 1229 | 400 g | 18 |
dark grey | 1223 | 1 kg | 10 |
dark grey | 1227 | 1,8 kg | 18 |
Filling polyester putty with the addition of aluminum particles, intended for filling large and deep dents and holes on larger surfaces. It is characterized by good heat dissipation and increased resistance to mechanical vibrations. Especially recommended for repairing car body elements exposed to temperature changes.
The product has very good adhesion to various surfaces. It can be applied over:
Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.
degrease
mixing ratio per weight
100 : 2
pot life
4 ÷ 7 min.
20°C
drying time
20 ÷ 30 min.
20°C
P80 ÷ P120
P120 ÷ P320
Filling polyester putty, especially recommended for repairing body parts exposed to temperature changes.
Body filler: 100
Hardener: 2
Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.
Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.
Pot life 4÷7 min. at 20°C
20÷30 min. at 20°C.
Temperatures below 20°C significantly increase the drying time.
Coarse sanding (dry): P80÷P120.
Final sanding (dry): P120÷P320.
5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
Do not exceed maximum temperature of 60°C.
Use accordin to the instrusctions of the radiator’s manufacturer.
Wait about 5 min. before starting IR drying.
Polyester body fillers can over coated with:
Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.