Hi-Heat

Application

Use only in a dry, airless, well-ventilated room.
The best temperature for aerosol application is 15 ÷ 25°C.

– The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand, and the surface should be sanded.
– In the case of plastic, it is recommended, before starting varnishing work, to heat the element at 50°C, which will facilitate the removal of silicone compounds from its surface.
– Do not use primer.
– Before use, shake the aerosol for about 2 minutes and try the spray on the cardboard.
– Keep the aerosol at a distance of 25-30 cm from the painted surface when painting.
– Apply the varnish in several thin layers at intervals of no more than 2-3 minutes. Shake the aerosol again before applying each successive layer.
– Dry the item for about 1 hour at room temperature, then, in about 30 minutes, raise the temperature to 160°C to cure the coating.
– It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application – this will improve the reuse of the product and preserve its existing properties as well as protect the nozzle from possible clogging.

Note: for safety purposes, always follow the data on the Material Safety Data Sheet for the product.

Drying times at room temperature:
– dust dry: 5 – 8 minutes
– touch dry: 20 minutes