Universal

High filling polyester body filler

Variants

Colour Art. No.Weight Quantity per carton
yellow 1096 250 g12
yellow1101 450 g18
yellow1102 700 g18
yellow1060 1 kg10
yellow10991,9 kg10
yellow76894 kg4
yellow 11064,5 kg1

Gloss grade

matt
Universal

Video

Description

High filling polyester putty recommended for repairing large and medium-sized dents and holes. It is characterized by its smooth and creamy consistency, very good filling properties and high quality finish. Universl in use, it is very easy to apply and sand. Features great adhesion to all kinds of surfaces, including galvanized steel and aluminum.

Advantages

  • Easy and smooth application thanks to its creamy consistency.
  • Good sanding properties.
  • Very good adhesion to metal.
  • High durability.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers as well as existing coatings in good condition.
  • Well sanded old or factory top coats.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    5 ÷ 6 min. / 20°C

  • Czas utwardzania

    Drying time
    17 ÷ 27 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Polyester body filler for car body repair.

  • Mieszanie wg wagi
  • Mixing ratio per weight

    Body filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

    Pot life 5÷6 min. at 20°C

  • Czas utwardzania
  • Drying time

    17÷27 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Final sanding (dry): P120÷P180.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



    

    Related products

    

    Check product tips

    

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top