Variants
color
art. nr.
capacity
quantity per carton
straw-transparent
1360
1 l
6
Gloss grade
semi-gloss
Technical documentation
Description
Ready to use 1K primer dedicated for the repair of plastic elements as an adhesion promoter.
Recommended for most plastics, except polyethylene.
Advantages
- Suitable for application wet on wet.
- Very short drying time.
- Very good adhesion to plastic.
Substrates
It is designed to be applied on surfaces made of various kinds of plastic, especially polypropylene, PP, and its mixtures.
Note: The coating does not improve adhesion to surfaces made of polyethylene, PE.
Good surface preparation is essential to achieve the best repair results.
Important informations
spraying viscosity
10 ÷ 12s / 20°C
1÷2 layers
HVLP / RP
ø1,2 ÷ 1,4 mm
between layers
~5 min.
before painting
10 min.
DO NOT SAND!
Use
For car body repairs, as an adhesion promoter for the application of primers and clear coats to plastic surfaces.
Spraying viscosisty
10÷12 seconds at 20°C
Ready to use product.
Number of layers
1÷2 layers.
Dry layer thickness: about 15 μm
Gun parameters
RP Nozzle: 1,2÷1,4mm; Pressure: 2,0÷2,2 bar.
HVLP Nozzle: 1.3÷1,4mm; Inlet pressure: 2,0 bar.
Flash off time
Between layers: about 5 minutes
Before paiting: about 10 minutes
Flash off time dependes on the temperature and layer thickness.
Do not sand!
Performance
1 liter of the mixture is enough to paint a surface of 7 ÷ 8 m2 of with a layer of 15 μm.
Further work
1K plastic primer can be directly over coated with:
- 2K acrylic primers.
- 2K acrylic top coats.
- 1K base coats.
General notes
- The best repair results can be achieved at room temperature. The temperature in the body shop and the temperature of the product should be similar
- It is recommended to use personal protection equipment. Protect the eyes and air ways.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Designed for application on substrates made of various types of plastics, especially polypropylene (PP) and its mixtures.
Note: The manufacturer does not guarantee adhesion to pure polyethylene, PE.
Currently, there are no questions and answers related to this product. Be the first one to create an inquiry using the form below.
