Repair Set

Use

Good for repairing large damages as well as
corroded car bodies.

Mixing ratio by weight

Polyester Resin : 100
Activator : 4

Stir the mixture well.

Gelling time

19-21 minutes at 20°C

Several layers of the mat can be applied.

Hardening time

35÷45 minutes at 20°C

Temperature below 20°C significantly increases the
hardening time.

Sanding

Coarse sanding (dry): P80÷P120

Aplication

1. Prepare suitable piece of glass mat, approximately 2 cm bigger than damaged place.
2. Mix the resin with the hardener and spread it onto a clean surface using a brush.
3. Place the mat, press it and soak with resin using a brush. Several layers of the mat can be applied.
4. Wait approximately 40 minutes. Mechanically process the laminate surface or level it up with a polyester putty.
5. Minimum application temperature is +10°C.

Note: Do not pour the remains of the mixed resin and hardener back to the tin!

Further work

Polyester laminates can be directly over coated with:

• 2K polyester putties,
• 2K polyester spray fillers,
• 2K epoxy putties,
• 2K acrylic fillers,
• 2K epoxy fillers.

General notes

• The rooms should be well ventilated.
• When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
• Clean the guns and equipment immediately after use.

Caution: To maintain safety, always follow the instructions given in the MSDS for the products.