color | art. no. | capacity | quantity per carton |
ecru | 1537 | 0,5 l | 6 |
white | 1525 | 0,5 l | 6 |
graphite | 1491 | 0,5 l | 6 |
black | 1428 | 0,5 l | 6 |
red | 1519 | 0,5 l | 6 |
grey | 1380 | 0,5 l | 6 |
hardener | 1920 | 0,1 l | 6 |
ecru | 1377 | 0,8 l + 0,16 l hardener | 6 |
white | 1578 | 0,8 l + 0,16 l hardener | 6 |
graphite | 1577 | 0,8 l + 0,16 l hardener | 6 |
black | 1418 | 0,8 l + 0,16 l hardener | 6 |
red | 1574 | 0,8 l + 0,16 l hardener | 6 |
grey | 1374 | 0,8 l + 0,16 l hardener | 6 |
ecru | 1540 | 2,5 l + 0,5 l hardener | 1 |
white | 1443 | 2,5 l + 0,5 l hardener | 1 |
black | 1553 | 2,5 l + 0,5 l hardener | 1 |
red | 1431 | 2,5 l + 0,5 l hardener | 1 |
grey | 1404 | 2,5 l + 0,5 l hardener | 1 |
grey | 1334 | 0,8 l + 0,2 l hardener | 6 |
white | 1345 | 0,8 l + 0,2 l hardener | 1 |
black | 1353 | 0,8 l + 0,2 l hardener | 6 |
grey | 9601 | 3,6 l | 4 |
white | 11626 | 3,6 l | 4 |
black | 11627 | 3,6 l | 4 |
hardener | 9602 | 0,9 l | 4 |
grey | 4833 | 4 l | 4 |
black | 6375 | 4 l | 4 |
white | 6376 | 4 l | 4 |
hardener | 4835 | 1 l | 6 |
2K high build acrylic primer designed for car body repairs. Universal high filling primer with very good adhesion to aluminum surfaces and excellet vertical stability. Available in 7 colors.
Acrylic primer 5:1 can be applied over:
degrease
mixing ratio
5 : 1 + 25 ÷ 30%
spraying viscosity
30 ÷ 50s / 20°C
pot life for the mixture
1 h / 20°C
2÷3 layers
HVLP / RP
ø1,5 ÷ 2,0 mm
between layers
~5 min.
before baking
~ 10 min.
drying time
3 ÷ 4 h / 20°C
30 min. / 60°C
P360 ÷ P500
P600 ÷ P1000
High filling primer for car body repair.
Primer: 5
Hardener: 1
Thinner: 25÷30%
Mix thoroughly until a homogeneous consistency is obtained.
about 30÷50 seconds at 20°C
about 1 h at 20°C.
2÷3 layers.
RP gun parameters
Nozzle: 1,6÷2,0 mm; Pressure: 2,0÷2,2 bar.
HVLP gun parameters
Nozzle: 1,5÷1,9 mm; Inlet pressure: 2,0 bar.
Between layers: approx. 5 minutes
Before baking: approx. 10 minutes
Flash off time depends on the temperature and the number of layers.
3-4 hours at 20°C
30 minutes at 60°C.
Temperatures below 20°C significantly increases the hardening time.
15÷20 minutes under short wave for coating thickness of 150÷200 µm.
Do not exceed maximum temperature of 60°C.
Use according to the recommendations of the equipment manufacturer.
Wait about 10 minutes before starting IR drying.
Machine sanding: P360÷P500.
Manual sanding: P280÷P320.
Machine sanding: P600÷P1000.
Manual sanding: P800÷P1000.
2K acrylic fillers can be directly over coated with:
– 2K acrylic topcoats.
– 1K basecoats.
– Do not exceed recommended doses of the hardener!
– The best repair results can be achieved at room temperature. The temperature in the body shop and the temperature of the product should be similar
– When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
– The rooms should be well ventilated.
– Clean the guns and equipment immediately after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.